HP ProLiant ML350 Generation 3 Server Maintenance and Service Guide

Removal and Replacement Procedures
System Fan Modules
To remove the system CPU fan module:
1. Complete the preparation procedures. Refer to “Preparation Procedures” earlier in this
chapter.
2. Open the bezel door. Refer to “Bezel Door (Tower Model Only)” earlier in this chapter.
3. Remove the access panel. Refer to “Access Panel” earlier in this chapter.
4. Remove the air baffle. Refer to “Air Baffle” earlier in this chapter.
5. Disconnect the system CPU fan cable (1) from the system board.
NOTE: I/O fan cable connection show for clarity (2).
1
2
Figure 2-13: Disconnecting the fan cables from the system board
2-16 HP ProLiant ML350 Generation 3 Server Maintenance and Service Guide