Compaq ProLiant ML350 Generation 2 Server Setup and Installation Guide

E-8 Compaq ProLiant ML350 Generation 2 Server Setup and Installation Guide
Compaq Confidential – Need to Know Required
Writer: Jennifer Hayward Project: Compaq ProLiant ML350 Generation 2 Server Setup and Installation Guide Comments:
Part Number: 236843-002 File Name: k-appe LEDs & Switches.doc Last Saved On: 9/4/01 11:16 AM
System Configuration Switch Settings
The ProLiant ML350 Generation 2 server contains one switchbank. This
section explains the use of each reserved and nonreserved switch.
1 234
on
5 678
Figure E-4. System configuration switch
Table E-4
System Configuration Switch Settings
Position Default Function/Description
1 Off Video disable
2 Off Lock configuration
3 Off Tower/Rack configuration
4 Off Enable diskette boot
5 Off Password disable
6 Off Clear CMOS/NVRAM
7 Off Reserved
8 Off Reserved
Note: Switch positions 7 and 8 are reserved for Compaq authorized
service providers only. Do not change the specified default setting for
these positions, unless instructed otherwise.