Compaq ProLiant ML350 Generation 2 Server Setup and Installation Guide

D-8 Compaq ProLiant ML350 Generation 2 Server Setup and Installation Guide
Compaq Confidential – Need to Know Required
Writer: Jennifer Hayward Project: Compaq ProLiant ML350 Generation 2 Server Setup and Installation Guide Comments:
Part Number: 236843-002 File Name: j-appd Troubleshooting.doc Last Saved On: 9/5/01 9:18 AM
Problems After Initial Startup
After your server has passed the Power-On Self-Test (POST), you may still
encounter errors, such as an inability to load your operating system. Use
Table D-4 to troubleshoot server installation problems that occur after the
initial startup.
For updated information on supported operating systems, log on to the
Internet at
www.compaq.com/products/servers/platforms/
NOTE: If the server is rebooting repeatedly, verify that the system is not restarting due to
an Automatic Server Recovery-2 (ASR-2) power up caused by another problem. Check
Compaq Insight Manager for notification of this event. Refer to the Compaq Servers
Troubleshooting Guide for more information.
Refer to the Compaq Servers Troubleshooting Guide for the following:
■ Information you need to collect when diagnosing software problems and
to provide when contacting support
■ Instructions on how to upgrade your operating system and its drivers
■ Information on available recovery options and advice on minimizing
downtime