Compaq ProLiant ML350 Generation 2 Server Maintenance and Service Guide

Removal and Replacement Procedures
2-18 Compaq ProLiant ML350 Generation 2 Server Maintenance and Service Guide
COMPAQ CONFIDENTIAL Codename: Forge Part Number: 236634-002 Last Saved On: 5/14/02 12:00 PM
Hot-Plug Hard Drive
To remove a hot-plug hard drive:
1. Complete the preparation procedures. Refer to “Preparation Procedures” earlier in this
chapter.
2. Open the bezel door. Refer to “Bezel Door” earlier in this chapter.
3. Slide the hard drive release latch (1) to open the ejector lever (2).
4. Pull the hard drive out of the drive bay.
1
2
Figure 2-14: Removing a hot-plug hard drive
To replace a hot-plug hard drive, push the drive back into the bay, then close the ejector lever
to fully seat the drive.