Compaq ProLiant ML350 Generation 2 Server Maintenance and Service Guide

Removal and Replacement Procedures
Compaq ProLiant ML350 Generation 2 Server Maintenance and Service Guide 2-17
COMPAQ CONFIDENTIAL Codename: Forge Part Number: 236634-002 Last Saved On: 5/14/02 12:00 PM
Hot-Plug Hard Drive Blank
To remove a hot-plug hard drive blank:
1. Complete the preparation procedures. Refer to “Preparation Procedures” earlier in this
chapter.
2. Open the bezel door. Refer to “Bezel Door” earlier in this chapter.
3. Slide the release latch to the left (1), then pull the drive blank out of the drive bay (2).
1
2
Figure 2-13: Removing a hot-plug hard drive blank
To replace a hot-plug hard drive blank, reverse steps 2 and 3.