Compaq ProLiant ML350 Generation 2 Server Maintenance and Service Guide

Removal and Replacement Procedures
Compaq ProLiant ML350 Generation 2 Server Maintenance and Service Guide 2-7
COMPAQ CONFIDENTIAL Codename: Forge Part Number: 236634-002 Last Saved On: 5/14/02 12:00 PM
Bezel (Rack)
To remove the bezel:
1. Complete the preparation procedures. Refer to “Preparation Procedures” earlier in this
chapter.
2. Loosen the two thumbscrews securing the rack bezel to the chassis (1).
3. Pull the bezel up, and then pull the bezel away from the chassis (2).
2
1
Figure 2-2: Removing the bezel door (rack model)
To replace the bezel door, reverse steps 2 and 3.