ProLiant ML330 Setup and Installation Guide

Switches and Jumpers C-3
Compaq Confidential – Need to Know Required
Writer: Donna Hollas Project: Compaq ProLiant ML330 Setup and Installation Guide Comments:
Part Number: 173868-001 File Name: i-appc Switches and Jumpers.doc Last Saved On: 1/17/00 3:14 PM
Server Feature Board Switch Settings
The following table defines the function for each switch setting:
Table C-3
Server Feature Board Configuration
Switch Settings (SW1)
Switch Function Default Position
1 On = Disable Video Off
2 Reserved Off
3 Reserved Off
4 Reserved Off
5 Reserved Off
6 Reserved Off
7 Reserved Off
8 Reserved Off
SCSI Device Jumper Settings
No two SCSI devices connected to the same SCSI controller can have the
same SCSI ID. If another SCSI device is connected to the same controller,
check its SCSI ID before beginning the installation procedure for the
additional device. The SCSI ID is set by jumpers located on each SCSI device.
Refer to your SCSI device option documentation.