ProLiant ML330 Setup and Installation Guide

Hardware Options Installation 3-9
Compaq Confidential – Need to Know Required
Writer: Donna Hollas Project: Compaq ProLiant ML330 Setup and Installation Guide Comments:
Part Number: 173868-001 File Name: d-ch3 Hardware Options Installation.doc Last Saved On: 1/28/00 2:13 PM
6. Slide the drive into the drive bay, then secure with two screws on
either side of the drive compartment.
1
2
2
Figure 3-7. Installing a 3.5-inch hard drive
7. Slide the drive compartment back into the chassis.
8. Connect the power and data cables to the back of all devices.
Figure 3-8. Connecting the hard drive cables
9. Replace the access panel and the front bezel.
10. Restore power to the server.
NOTE: Using a non-Ultra2 drive impacts SCSI bus performance.