Compaq ProLiant ML330 Generation 2

Compaq ProLiant ML330 G2 Service Overview 16

Rev. 1.0 Page 16 of 20

Step Action

below:

9. Secure the assembly clip on the front side of the processor to the socket , and then

lock the processor in place by pressing down on the assembly clip lever

.

Caution: Applying too much pressure on the lever could break it. Use care when

performing this step.

10. Install the corresponding PPM before powering up the server. (See

Installing the PPM for

Processor 2

11. Reinstall the fan baffle by reversing Step 4.