HP ProLiant ML310 Generation 4 Server Maintenance and Service Guide

Removal and replacement procedures 51
7.
Apply all the grease to the top of the processor in one of the following patterns to ensure even
distribution:
8. Install the heatsink.
CAUTION: Heatsink retaining screws should be tightened in diagonally opposite pairs (in an
"X" pattern).
9. Install all components removed from the failed system board.
IMPORTANT: Install all components with the same configuration that was used on the failed
system board.
10. Install the access panel.
11. Install the bezel.
12. Install the server in the rack, if necessary.
13. Power up the server.