HP ProLiant ML310 G3 Data Protection Storage Server installation guide (June 2006)

1. On the PC client, select Start > Run.AtOpen,typemstsc,thenclick

OK.

2. Enter the serial number of the stor age server followed by a h yphen (-) in

the Computer box and click Connect. For example, D4059ABC3433-

NOTE:

If you are able to determine the IP address from your

DHCP server, you can substitute the IP address for the

serial number and hyphen (-). For example: 192.100.0.1

3. Log in to the HP ProLiant Data Protection Storage Server with the

default user name administrator and the password hpinvent.TheHP

ProLiant Data Protection Storage Server Management Console and the

Rapid Startup Wizard start automatically.

NOTE:

You can change the administrator name and password

when you configure the server using the Rapid Startup

Wiz ard. See Rapid Startup Wizard on page 36.

4. To compl ete network c onfiguration using the Rapid Startup Wizard,

see Configuring the server on the network on page 33.

HP ProLiant ML310 G3 Data Protection Storage Server