HP ProLiant ML310 G3 Data Protection Storage Server installation guide (June 2006)

7. On the Int ernet Options dialog box, click OK to finish.

To co nnect the storage server to a net work using the Remote Browser

method

1. On the remote client machine, open Internet Explorer and

enter https:// and the serial number of the storage server

followed by a hyphen (-), and then:3202. For example,

https://D4059ABC3433-:3202. Press Enter.

NOTE:

If you a re able to determine the IP address from your DHCP

server, you can substitute the IP address for the serial

number and hyphen. For example: 192.100.0.1:3202.

2. Click OK on the Security Alert prompt.

3. Log in to the HP ProLiant Data Protection Storage Server Management

console with the default user name administrator and the

password hpinvent. The HP ProLiant Data Protection Storage

Server Management Console and the Rapid Startup Wizard start

automatically.

NOTE:

You can change the administrator name and password

when you configure the server using the Rapid Startup

Wiz ard on page 36.

4. To complete network configuration using the Rapid Startup Wizard,

see Configuring the server on the network on page 33.

IMPORTANT:

If you are using the Remote Br owser method to access the HP Data

Prote

ction Storage Server Management console and Rapid Startup

Wiz ard, always close the remote session before closing your Inter net

browser. Closing the Internet browser does not close the remote session.

Failure to close your rem

ote session impacts the limited number of remot e

sessions allowed on the storage server at any g

iven time.

Using the Remote Desktop method

To connect the storage ser ver to a network using the Remote Desktop

method

Accessing the HP Data Protection Storage Server Management

console