HP ProLiant ML310 G3 Data Protection Storage Server installation guide (June 2006)

To conn ect t he storage server to a n etwork using t he Direct Attach method

1. Log in to the HP ProLiant Data Protection Storage Server with the

default user n ame administrator and the password hpinvent.TheHP

ProLiant Data Protection Storage Server Management Console and the

Rapid Startup Wizard start automatically.

NOTE:

You can change the administrator name and password

when you configure the server using the Rapid Startup

Wiz ard . See Rapid Startup Wiz ard on page 36.

2. To complete network configuration using the Rapid Startup Wizard,

see Configuring the server on the network on page 33.

Using the R emote Bro wser method

The storage server ships with DHCP enabled on th e network port. If the

sever is placed on a DHCP-enabled network and the serial number of

the device is known, the server can be accessed through a client running

Internet Explorer 5.5 (or later) on that network, using the TCP/IP 3202 port.

IMPORTANT:

Before you begin this procedure, ensure that you have the following:

• Windows-based PC loaded with Internet Explor er 5.5 (or later) on

thesamelocalnetworkasthestorageserver

• DHCP-enabled network

• Serial number or IP address of the storage server

To connect the server to a network using the Remote Browser method, you

must first ensure that the client is configured to download signed ActiveX

controls.

To enable ActiveX controls

1. On the remote client machine, open the Internet Explorer web browser

and select Tools > Internet Options > Security.

Accessing the HP Data Protection Storage Server Management

console