HP ProLiant ML310 G3 Data Protection Storage Server installation guide (June 2006)

Configuration checklist
Use the following checklist to make sure you have completed all
configur ation tasks for your HP ProLiant Storage Server. The steps for each
task are explained in more detail in subsequent chapters of this guide.
Table 3 Install ation and configuration checklist
Steps
Reference
1. Unpack server, check kit
contents, and become familiar
with front and back panels of
storage server. Locate and
write down serial number of
storage serve r.
See Checking kit
contents on page 17.
2. Connect cables; (optional)
connect a keyboard, mouse,
and monitor; power on server,
and log in to the server.
See Cabling the
server on page 21,
Powering on the server,
and Direct Atta ch method.
3. Access the HP Data
Protection Storage Server
Management console.
• Direct Attach method
• Remote Browse method
• Remote Desktop method
• iLO 2 method
See Accessing
the HP Storage
Server Management
console on page 25.
4. Complete the storage server
configuration worksheet.
See Server configuration
worksheet on page 33.
5. Run Rapid Startup Wizard. See Rapid Startup
Wizard on page 36.
6. Complete s ystem
configuration.
See Complete sy stem
configuration on page 41.
7. C o n fi g u re s t o ra g e s e r ve r
for Web access, if necessary.
See Configuring storage
server for Web access
(optional) on page 43.
16 Setup overview