ProLiant ML310 Generation 2 Server Maintenance and Service Guide
Table Of Contents
- HP ProLiant ML310 Generation 2 Server Maintenance and Service Guide
- Notice
- Contents
- Illustrated parts catalog
- Removal and replacement procedures
- Required tools
- Safety considerations
- Preparation procedures
- Bezel
- Hot-plug SCSI hard drive
- Hot-plug SATA/SAS hard drive
- Access panel
- PCI expansion board
- Battery
- DIMM
- Air baffle
- Fan
- Power supply
- Processor assembly
- Diskette drive
- CD-ROM/DVD-ROM drive
- Installing a full-height tape drive option
- Full-height tape drive
- Power button/LED board
- Hard drive (non-hot-plug)
- Hot-plug SCSI backplane
- Hot-plug SATA or SAS backplane
- System board
- Server cabling
- Diagnostic tools
- Server component identification
- Front panel components
- Front panel LEDs and buttons
- Rear panel components
- Rear panel LEDs and buttons
- System board components
- System board LEDs
- System LEDs and internal health LED combinations
- SCSI IDs
- Hot-plug SCSI hard drive LEDs
- Hot-plug SCSI hard drive LED combinations
- Hot-plug SATA or SAS IDs
- SATA or SAS hard drive LEDs
- Fan locations
- Specifications
- Acronyms and abbreviations
- Index
53
Server component identification
In this section
Front panel components................................................................................................................53
Front panel LEDs and buttons......................................................................................................54
Rear panel components.................................................................................................................55
Rear panel LEDs and buttons .......................................................................................................56
System board components............................................................................................................57
System board LEDs......................................................................................................................59
System LEDs and internal health LED combinations ..................................................................60
SCSI IDs.......................................................................................................................................62
Hot-plug SCSI hard drive LEDs...................................................................................................62
Hot-plug SCSI hard drive LED combinations..............................................................................63
Hot-plug SATA or SAS IDs.........................................................................................................64
SATA or SAS hard drive LEDs ...................................................................................................65
Fan locations.................................................................................................................................66
Front panel components