ProLiant ML310 Generation 2 Server Maintenance and Service Guide

42 HP ProLiant ML310 Generation 2 Server Maintenance and Service Guide
NOTE: If replacing only the hard drive cage, retain the backplane
for use with the replacement hard drive cage.
To replace the component, reverse the removal procedure.
System board
To remove the component:
1. Power down the server ("Powering down the server" on page 15
).
2. Remove the bezel ("Bezel" on page 17
).
3. Remove the access panel ("Access panel" on page 20
).
4. Remove the air baffle ("Air baffle" on page 25
).
5. Disconnect all cabling.