ProLiant ML150 Server NOS Installation and Software Guide

Installing SCO OpenServer 5.0.7
6. Select the keyboard type by pressing the Space Bar. Then select Accept above
choices, and press the Enter key.
7. Enter the license number and license code. Then select Accept above choices,
and press the Enter key.
8. Select Fresh and then press the Enter key.
9. Select OK, and press the Enter key to start the configuration.
10. Enter the information if the default settings do not match your requirements.
Then select Accept above choices, and press the Enter key.
11. Select the system profile. Then select Accept above choices, and press the Enter
key.
12. Select Hard disk setup and Optional software. Then select Accept above
choices, and press the Enter key.
13. Configure the optional software settings. Press the direction keys to move
between the items, and the Space Bar to change the setting for each item.
Network card: Deferred
Network address: No networking card configured
Video and graphics: VESA SVGA
Mouse: (Select the type of your mouse.)
Email system: MMDF
Then select Accept above choices, and press the Enter key.
14. Enter the root password, and re-enter it to confirm. Then select Accept above
choices, and press the Enter key.
15. Select OK, and press the Enter key to start the installation.
16. Press the Enter key when prompted.
17. After the installation, press the Enter key repeatedly until the Safe to Power Off
message appears. Press any key to reboot the system.
18. Upon the boot prompt, press the Enter key to boot.
NOTE: Before booting, make sure that the CD-ROM and flexible disk drives are empty.
HP ProLiant ML150 Server NOS Installation and Software Guide 12-3
HP CONFIDENTIAL
Writer: Pauline Tsai File Name: m-ch12 Installing SCO OpenServer 5.0.7.doc
Codename: Stone Soup Part Number: 343330-002 Last Saved On: 11/10/03 12:34 PM