ProLiant ML150 Server NOS Installation and Software Guide

Installing SCO OpenServer 5.0.7
Performing the SCO OpenServer 5.0.7 Installation
Booting
1. Turn on the server and insert the Base Operating System installation CD-ROM.
2. On boot prompt, type link after the prompt as shown below:
boot: defbootstr link=“ad320”
Press the Enter key.
3. When the “Please insert the fd(65)/ad320 volume and press <Return>, or ‘q’ to
quit:” message appears, insert the (ad320) package BTLD diskette you created
from the HP Startup CD-ROM, and press the Enter key.
4. After loading the SCSI driver, press the Enter key to start the installation.
Installing the Operating System
1. Insert the (ad320) package BTLD diskette (HP ProLiant ML150 SCO
OpenServer 5.0.7 SCSI drivers diskette), and press the Enter key.
2. When the RESTRICTED RIGHTS LEGEND message appears, press the Enter
key.
3. Select Accept upon the End User License Agreement (EULA), and press the
Enter key.
4. Select the installation media device. Press the direction keys to move between the
items, and the Space Bar to change the setting for each item.
Media device to be used: IDE CD ROM
IDE Controller: primary
Master or Slave: master
Then select Accept above choices, and press the Enter key.
5. Make sure that the Base Operating System installation CD-ROM is inserted.
Select OK and press the Enter key.
12-2 HP ProLiant ML150 Server NOS Installation and Software Guide
HP CONFIDENTIAL
Writer: Pauline Tsai File Name: m-ch12 Installing SCO OpenServer 5.0.7.doc
Codename: Stone Soup Part Number: 343330-002 Last Saved On: 11/10/03 12:34 PM