ProLiant ML150 Server NOS Installation and Software Guide

Installing SCO UnixWare 7
HP ProLiant ML150 Server NOS Installation and Software Guide 11-5
HP CONFIDENTIAL
Writer: Pauline Tsai File Name: l-ch11 Installing SCO UnixWare 7.doc
Codename: Stone Soup Part Number: 343330-002 Last Saved On: 11/13/03 12:00 PM
Installing the Network Driver
1. Insert the Startup CD-ROM and mount the CD-ROM. For example:
# mount /dev/cdrom/cdrom1 /mnt
2. Copy the e1008g.pkg file to any directory, like /tmp. For example:
# cp /mnt/drivers/ou8uw7xl/e1008g.pkg /tmp
3. Make sure that no other users log on the system, and all user applications are
closed.
4. If there is an older version of the e1008g driver on the system (to find out the
driver version, type
pkginfo -l e1008g):
a. Run
netcfg and remove any configured NICs.
b. Exit
netcfg.
c. Remove the old driver by typing
pkgrm e1008g.
5. Install the new driver using
pkgadd. For example:
# pkgadd -d /tmp/e1008g.pkg
Press the Enter key, and then press the Y key then the Enter key to confirm the
installation.
6. Run
netcfg to add and configure the NICs.
a. On the pop-up window, click Hardware > Add new LAN adapter.
b. Select Ethernet-Intel(R) PRO/1000MT Network Connection (DDI
8)(7.2.10)-PCI Slot 0 Bus 4 Device 1 Function 0, and click Continue.
c. On the Network Driver Configuration window, click OK.
d. On the Add protocol window, select TCP/IP and click Add.
e. On the Internet Protocol Configuration window, click Yes (or No to
configure the settings) for the DHCP client, and then click OK.
f. On the Configure networking product window, click OK.
g. Click Hardware > Exit to exit netcfg.
7. Type
shutdown –y now, and press the Enter key to reboot the system.