ProLiant ML150 Server NOS Installation and Software Guide

Installing SCO UnixWare 7
4. Press the F2 key to select Customize partitions for disk configuration, and press
the Enter key.
On the Disk 1 Partitions page, press the F2 key to select UNIX System, and
press the Enter key. Then press the F9 key.
5. Press the F10 key.
6. Select Use default filesystem sizes and types, and press the F10 key.
7. Select Use default disk options, and press the F10 key.
8. Select License-Based Defaults, and press the F10 key.
9. Select Use the detected adapter shown above, and press the F10 key.
10. On the Configure Networking Hardware page, press the F2 key to select
Auto_Auto for Adapter DuplexMode/Speed, and press the Enter key.
11. Press the F10 key, and enter your network configuration, and then press the F10
key. Or, press the F8 key to defer the configuration.
12. Enter the date and time values. Or, if date and time settings are correct, press the
F10 key.
13. Select a desired security level, and press the F10 key.
14. Enter the system owner’s information:
a. Type the owner’s name, and press the Enter key.
b. Type the owner’s login ID, and press the Enter key.
c. Type the owner’s user ID (UID) number, and press the Enter key. Default is
101.
d. Type the owner’s password, and press the Enter key.
e. Type the password again, and press the F10 key.
15. Enter the root password, press the Enter key to re-enter it, and then press the F10
key.
16. Select Accept, and press the F10 key to accept the license agreement.
17. Press the F10 key to install the operating system.
HP ProLiant ML150 Server NOS Installation and Software Guide 11-3
HP CONFIDENTIAL
Writer: Pauline Tsai File Name: l-ch11 Installing SCO UnixWare 7.doc
Codename: Stone Soup Part Number: 343330-002 Last Saved On: 11/10/03 12:34 PM