ProLiant ML150 Server NOS Installation and Software Guide

Installing SCO UnixWare 7
Performing the SCO UnixWare 7 Installation
Booting
1. Turn on the server and insert the UnixWare 7.1.3 Base Operating System Disk 1
of 4.
2. The system will display a graphic menu. Default is Proceed with installation in
English. Press the Enter key.
3. Press the F10 key on the welcome screen to continue.
Basic Configuration
1. Select Americas (Latin-1) for your zone, and press the F10 key.
2. Select C (English) for your locale, and press the F10 key.
3. Select United States for your keyboard, and press the F10 key.
4. Enter the license information from your registration card (or request it through an
online form), and then press the F10 key.
Installing the SCSI Driver
1. Insert the SCO UnixWare 7 AIC-7902W SCSI driver (HP ProLiant ML150 SCO
Unixware 7.1.3 SCSI drivers) diskette you created from the HP Startup CD-
ROM. Select Install HBA diskette and press the F10 key to load the diskette.
2. After loading the diskette, select Proceed with installation, and press the F10
key.
Installing the Operating System
1. Select Do not enter the DCU (auto-configure drivers), and press the F10 key.
2. Enter the node name for your system, and press the F10 key.
3. Select Install from CD-ROM, and press the F10 key.
11-2 HP ProLiant ML150 Server NOS Installation and Software Guide
HP CONFIDENTIAL
Writer: Pauline Tsai File Name: l-ch11 Installing SCO UnixWare 7.doc
Codename: Stone Soup Part Number: 343330-002 Last Saved On: 11/10/03 12:34 PM