ProLiant ML150 Server NOS Installation and Software Guide

Installing SCO UnixWare 7

Preparing the Installation

Please refer to “Preparing the Server for NOS Installation” in Chapter 1 for

recommendations on server preparation. Then gather the following material:

•

The HP Startup CD-ROM for the HP ProLiant ML150 server

One blank, formatted 3.5-inch diskette

SCO UnixWare 7 (Release 7.1.3) CD-ROMs

Two or more clients for testing purposes (Optional)

Creating the Driver Diskette

1. Insert one blank, formatted 3.5” diskette into the flexible diskette drive of a PC

running Microsoft Windows.

2. Insert the HP Startup CD-ROM into the CD-ROM drive of the above PC and

click HP ProLiant ML150 drivers on the Startup menu.

3. Select the proper driver to install.

4. Follow the on-screen instructions to create the SCO UnixWare 7 AIC-7902W

SCSI driver diskette (HP ProLiant ML150 SCO Unixware 7.1.3 SCSI drivers

diskette).

NOTE: If the PC does not auto-start the Startup menu, start it by opening startup.htm, found

at the root level of the Startup CD-ROM.

HP ProLiant ML150 Server NOS Installation and Software Guide 11-1

HP CONFIDENTIAL

Writer: Pauline Tsai File Name: l-ch11 Installing SCO UnixWare 7.doc

Codename: Stone Soup Part Number: 343330-002 Last Saved On: 11/10/03 12:34 PM