ProLiant ML150 Server NOS Installation and Software Guide

Installing SCO Open UNIX 8
HP ProLiant ML150 Server NOS Installation and Software Guide 10-5
HP CONFIDENTIAL
Writer: Pauline Tsai File Name: k-ch10 Installing SCO Open UNIX 8.doc
Codename: Stone Soup Part Number: 343330-002 Last Saved On: 11/13/03 12:00 PM
24. After installing the selected profile, press the F10 key.
25. Insert the Optional Services CD CD3 - RELEASE 8.0 Disk 3 of 4, and then press
the F10 key.
26. Select products and press the Enter key to install.
NOTE: If you want to install ReliantHA Host Monitoring Software or Merge 5.5.1, you need
to buy licenses for these two products.
27. After the installation is complete, press the F10 key.
28. The system will be rebuilt kernel and reset.
29. Your system is now set up and ready to use. It will enter the login prompt. Enter
“root” for the user name and the root password. Double-click the dtterm icon to
continue.
Installing the Network Driver
1. Insert the Startup CD-ROM and mount the CD-ROM.
# mount /dev/cdrom/cdrom1 /mnt
2. Copy the e1008g.pkg file to any directory, like /tmp.
# cp /mnt/drivers/ou8uw7xl/e1008g.pkg /tmp
3. Make sure that no other users log on the system, and all user applications are
closed.
4. If there is an older version of the e1008g driver on the system (to find out the
driver version, type
pkginfo -l e1008g):
a. Run
netcfg and remove any configured NICs.
b. Exit
netcfg.
c. Remove the old driver by typing
pkgrm e1008g.
5. Install the new driver using
pkgadd.
# pkgadd -d /tmp/e1008g.pkg
Press the Enter key, and then press the Y key then the Enter key to confirm the
installation.