ProLiant ML150 Server NOS Installation and Software Guide

Installing SCO Open UNIX 8
NOTE: If the PC does not auto-start the Startup menu, start it by opening startup.htm, found
at the root level of the Startup CD-ROM.
Performing the SCO Open UNIX 8 Installation
Booting
1. Turn on the server and insert the Base Operating System CD 1 - RELEASE 8.0
Disk 1 of 4.
2. The system will display a graphic menu. Default is Proceed with installation in
English. Press the Enter key to continue.
3. Press the F10 key on the welcome screen to continue.
Basic Configuration
1. Select Americas (Latin-1) for your zone, and press the F10 key.
2. Select C (English) for your locale, and press the F10 key.
3. Select United States for your keyboard, and press the F10 key.
4. Enter the license information from your registration card (or request it through an
online form), and then press the F10 key.
Installing the SCSI Driver
1. Insert the SCO Open UNIX 8 AIC-7902W SCSI driver (HP ProLiant ML150
SCO Open UNIX 8 SCSI drivers) diskette you created from the HP Startup CD-
ROM. Select Install HBA diskette and press the F10 key to load the diskette.
2. After loading the diskette, select Proceed with installation, and press the F10
key.
10-2 HP ProLiant ML150 Server NOS Installation and Software Guide
HP CONFIDENTIAL
Writer: Pauline Tsai File Name: k-ch10 Installing SCO Open UNIX 8.doc
Codename: Stone Soup Part Number: 343330-002 Last Saved On: 11/10/03 12:34 PM