ProLiant ML150 Server NOS Installation and Software Guide

10
Installing SCO Open UNIX 8
Preparing the Installation
Please refer to “Preparing the Server for NOS Installation” in Chapter 1 for
recommendations on server preparation. Then gather the following material:
•
•
•
•
The HP Startup CD-ROM for the HP ProLiant ML150 server
One blank, formatted 3.5-inch diskette
SCO Open UNIX 8 (Release 8.0.0) CD-ROMs
Two or more clients for testing purposes (Optional)
NOTE: SCO Open UNIX 8 does not support the USB mouse. If you want to use a mouse, use
a PS-2 or serial mouse.
Creating the Driver Diskette
1. Insert one blank, formatted 3.5” diskette into the flexible diskette drive of a PC
running Microsoft Windows.
2. Insert the HP Startup CD-ROM into the CD-ROM drive of the above PC and
click HP ProLiant ML150 drivers on the Startup menu.
3. Select the proper driver to install.
4. Follow the on-screen instructions to create the SCO Open UNIX 8 AIC-7902W
SCSI driver diskette (HP ProLiant ML150 SCO Open UNIX 8 SCSI drivers
diskette).
HP ProLiant ML150 Server NOS Installation and Software Guide 10-1
HP CONFIDENTIAL
Writer: Pauline Tsai File Name: k-ch10 Installing SCO Open UNIX 8.doc
Codename: Stone Soup Part Number: 343330-002 Last Saved On: 11/10/03 12:34 PM