ProLiant ML150 Server NOS Installation and Software Guide

Installing Red Flag Linux 4.0 Advanced Server
6. Accept the default setting for 引导记录安装位置 (Install Boot Loader record
on). Click 下一步 (Next) to continue.
7. The installation program will summarize the HDD partitioning information, boot
manager installation location as well as the size of software that will be installed.
Review, and if this is acceptable, click 下一步 (Next) to proceed.
8. Enter a password for “root” access, and re-enter it to confirm. Because the root
user has extensive permissions, the password for “root” should be chosen
carefully. Click 下一步 (Next) to continue.
9. Click 下一步 (Next) to start the installation. After the installation, the system
will reboot.
10. After rebooting, the installation logs will be saved in the directory of
/root/install.log, and the installation configurations will be saved in the directory
of /root/anaconda-ks.cfg.
11. If you want to create a boot diskette, uncheck the 跳过创建引导盘 (Skip Boot
Diskette Creation) item, insert one blank, formatted 3.5” diskette, and click 下
一步 (Next).
Otherwise, check the 跳过创建引导盘 (Skip Boot Diskette Creation) item, and
click 下一步 (Next).
12. The installation of Red Flag Linux 4.0 Professional Server is finished. Make sure
that the CD-ROM and flexible diskette drives are empty. Click 下一步 (Next) to
reboot the system.
13. Your system is now set up and ready to use. It will enter the login prompt. Enter
“root” for the login name, and the root password. Then type
startx to start X-
Windows.
HP ProLiant ML150 Server NOS Installation and Software Guide 9-3
HP CONFIDENTIAL
Writer: Pauline Tsai File Name: j-ch9 Installing Red Flag Linux 4.0 Advanced Server.doc
Codename: Stone Soup Part Number: 343330-002 Last Saved On: 11/10/03 12:33 PM