ProLiant ML150 Server NOS Installation and Software Guide

8
Installing Turbolinux 8 Server
Preparing the Installation
Please refer to “Preparing the Server for NOS Installation” in Chapter 1 for
recommendations on server preparation. Then gather the following material:
•
•
•
•
The HP Startup CD-ROM for the HP ProLiant ML150 server
One blank, formatted 3.5-inch diskette (Optional)
Turbolinux 8 Server CD-ROM
Two or more clients for testing purposes (Optional)
Performing the Turbolinux 8 Server Installation
Booting
1. Turn on the server and insert the Turbolinux 8 Server CD-ROM.
2. On boot prompt, press the Enter key.
3. After loading the SCSI driver, select a language (English as the default setting)
and press the Enter key to begin the installation.
Installing the Operating System
1. Accept the default setting for the type of the installation, and click Next.
2. Select the type of your keyboard, and click Next.
HP ProLiant ML150 Server NOS Installation and Software Guide 8-1
HP CONFIDENTIAL
Writer: Pauline Tsai File Name: i-ch8 Installing Turbolinux 8 Server.doc
Codename: Stone Soup Part Number: 343330-002 Last Saved On: 11/10/03 12:33 PM