ProLiant ML150 Server NOS Installation and Software Guide

Installing United Linux 1.0 (turbolinux enterprise server 8)
c. Set the parameters as follows:
Format (file system): Swap
Size: Start cylinder: (by default value)
Size: End: (2 x server memory size)
Mount point: Swap
d. Click OK.
6. Create a root partition.
a. Select Create.
b. Select Primary partition, and click OK.
c. Set the parameters as follows:
Format (file system): Ext3
Size: Start cylinder: (by default value)
Size: End: (by default value)
Mount point: /
d. Click OK.
7. Click Next to finish the partitioning schemes.
8. Click Accept to proceed.
9. Click Yes, install on the warning message to proceed with the installation.
Performing the Installation
1. Insert the turbolinux enterprise server 8 Disk 1 Install CD when prompted, and
click OK.
2. Insert the turbolinux enterprise server 8 Disk 2 UnitedLinux v1.0 Binary CD1
when prompted, and click OK.
3. Insert the Turbolinux enterprise server 8 Disk 1 Install CD again when prompted,
and click OK.
HP ProLiant ML150 Server NOS Installation and Software Guide 7-3
HP CONFIDENTIAL
Writer: Pauline Tsai File Name: h-ch7 Installing United Linux 1.0 (turbolinux enterprise server 8).doc
Codename: Stone Soup Part Number: 343330-002 Last Saved On: 11/10/03 12:33 PM