ProLiant ML150 Server NOS Installation and Software Guide

Installing United Linux 1.0 (turbolinux enterprise server 8)
Language Selection
Select English (US) for your language, and click Accept. The operating system will
start to analyze your system.
Installation Settings
Disk partitioning will vary depending on the type of services the server will provide.
The amount of swap space required will also vary depending on the amount of RAM
in the system. The following partitioning scheme is given as an example.
1. Select Change > Partitioning.
2. The screen displays the suggested partitioning. Select Create custom partition
setup, and click Next.
3. Select Custom partitioning – for expe rts, and click OK.
NOTE: If your hard disk is not empty, delete all partitions first.
4. Create a boot partition.
a. Select Create.
b. Select Primary partition, and click OK.
c. Set the parameters as follows:
Format (file system): Ext3
Size: Start cylinder: 0
Size: End: +20M
Mount point: /boot
d. Click OK.
5. Create a swap partition.
a. Select Create.
b. Select Primary partition, and click OK.
7-2 HP ProLiant ML150 Server NOS Installation and Software Guide
HP CONFIDENTIAL
Writer: Pauline Tsai File Name: h-ch7 Installing United Linux 1.0 (turbolinux enterprise server 8).doc
Codename: Stone Soup Part Number: 343330-002 Last Saved On: 11/10/03 12:33 PM