ProLiant ML150 Server NOS Installation and Software Guide

Installing United Linux 1.0 (SuSE Linux Enterprise Server 8)
6-4 HP ProLiant ML150 Server NOS Installation and Software Guide
HP CONFIDENTIAL
Writer: Pauline Tsai File Name: g-ch6 Installing United Linux 1.0 (SuSE Linux Enterprise Server 8).doc
Codename: Stone Soup Part Number: 343330-002 Last Saved On: 11/10/03 12:32 PM
•
•
•
4. The installation of the operating system is complete. The system must reboot. Be
sure that the CD-ROM and flexible diskette drives are empty Press the Enter key
to reboot.
5. Enter a password (at least 5 characters) for the “root” access, and enter it again.
Because the root user has extensive permissions, the password for “root” should
be chosen carefully. Click Next to continue.
6. Enter the personal information as necessary. Click Next to continue.
7. Select the current desktop settings for the X-Window system (the default setting
is Graphical desktop environment). Click Accept to continue.
NOTE: The system will detect your printer. If your do not want to detect the printer, click Skip
detection to continue.
8. The screen will display the configuration information. If you want to change the
default settings, click an item, or click Change on the bottom and select an item.
Then click Next.
9. Your system is now set up and ready to use. The system must reboot. Click OK
to continue, and then the system will enter the login prompt.
MSHD Installation
Please refer to “HP ML150 Server Health Driver” in Chapter 13 for the detailed
instructions on installing MSHD from the Startup CD-ROM.
On-Line Information and Software Sources
HP World Wide Web access: http://www.hp.com/
United Linux World Wide Web access:
http://www.unitedlinux.com
SuSE World Wide Web access: http://www.suse.de/en/