ProLiant ML150 Server NOS Installation and Software Guide

Installing United Linux 1.0 (SCO Linux 4)
5. Create a swap partition.
a. Select Create.
b. Select Primary partition.
c. Set the parameters for the swap partition as follows:
Format (file system):
swap
Size: Start: default
End: 2 x amount of memory in server
Mount point: swap
6. Create a root partition.
a. Select Create.
b. Select Primary partition.
c. Set the parameters for the root partition as follows:
Format (file system):
ext2
Size: Start: Default
End: Default
Mount point: /
7. Click Next to proceed.
System Boot Configuration
SuSE Linux uses GRUB as its boot manager. Review and modify as necessary. Click
Next to continue.
Confirm Installation
1. The installation program will summarize the HDD partitioning information, boot
manager installation location as well as the size of software that will be installed.
Review, and if this is acceptable, click Next to proceed.
2. Click Yes, install to proceed with the installation.
3. Insert United Linux Version 1.0 CD 2 when prompted, and then click OK.
HP ProLiant ML150 Servre NOS Installation and Software Guide 5-3
HP CONFIDENTIAL
Writer: Pauline Tsai File Name: f-ch5 Installing United Linux 1.0 (SCO Linux 4).doc
Codename: Stone Soup Part Number: 343330-002 Last Saved On: 11/10/03 12:32 PM