ProLiant ML150 Server NOS Installation and Software Guide

Installing Red Hat Linux 9.0 Professional
c. Under Allowable Drives, be sure only your boot device is selected. If you do
not, you may end up with an installation that spans multiple drives.
d. Set “Size (MB)” to 100.
e. Be sure Additional Size Options is set to Fixed Size.
f. Select Force to be a primary partition.
g. Click OK.
6. Click New.
a. Change the File System Type to swap.
b. Be sure that only your boot device is selected under Allowable Drives.
c. Set Size (MB) to the following formula: size = (RAM in system) x 2.
d. Be sure “Additional Size Options” is set to Fixed Size.
e. Select Force to be a primary partition.
f. Click OK.
7. Click New.
a. For Mount Point, enter
/.
b. Be sure File System Type: is set to ext3.
c. Be sure that only your boot device is selected under Allowable Drives.
d. Set Additional Size Options to Fill to maximum allowable size.
e. Select Force to be a primary partition.
f. Click OK.
g. Click Next.
Boot Loader Configuration
1. Click the checkbox for Configure advanced boot loader options.
2. Click Next.
3. Click Change Drive Order.
HP ProLiant ML150 Server NOS Installation and Software Guide 4-3
HP CONFIDENTIAL
Writer: Pauline Tsai File Name: e-ch4 Installing Red Hat Linux 9.0 Professional.doc
Codename: Stone Soup Part Number: 343330-002 Last Saved On: 11/10/03 12:32 PM