ProLiant ML150 Server NOS Installation and Software Guide

4
Installing Red Hat Linux 9.0 Professional
Preparing the Installation
Please refer to “Preparing the Server for NOS Installation” in Chapter 1 for
recommendations on server preparation. Then gather the following materials:
•
•
•
The HP Startup CD-ROM for the HP ProLiant ML150 server
Red Hat Linux 9.0 Installation CD-ROMs
Two or more clients for testing purposes (Optional)
Performing Red Hat Linux Installation
Booting
1. Boot your new server from the Red Hat 9.0 Professional Installation CD-ROM.
2. When you see the boot: prompt, press the Enter key.
3. If your correct SCSI controller was correctly detected, you should see a Loading
SCSI Driver window appear with the name of the SCSI controller in your
system.
4. Next, you should see the Welcome to Red Hat Linux screen. Click Next.
HP ProLiant ML150 Server NOS Installation and Software Guide 4-1
HP CONFIDENTIAL
Writer: Pauline Tsai File Name: e-ch4 Installing Red Hat Linux 9.0 Professional.doc
Codename: Stone Soup Part Number: 343330-002 Last Saved On: 11/10/03 12:32 PM