ProLiant ML150 Server NOS Installation and Software Guide

Installing Microsoft Windows Server 2003 and Small Business Server 2003
21. If prompted, insert the Windows 2003 CD-ROM and click OK to continue.
22. Configuring active directory display shows again. Click Finish to close the
Wizard utility. This completes the active directory installation.
23. Click Restart Now to reboot the system. Remove the CD-ROM if present.
24. At the login prompt, type the password. Click the Options button and verify that
Log on to: HOST appears on the dialog box. Click OK to start the logon
process.
25. This Server is Now a Domain Controller dialog box will display after the
login, click Finish to close.
For Windows Small Business Server 2003:
1. Connect the server to a network.
2. Double-click the Continue Setup icon on the desktop of the server to open the
Microsoft Windows Small Business Server Setup wizard.
3. Click Next to continue.
4. Select the proper item on the Requirements screen, and click Next.
5. Fill in the fields on the Company Information screen, and click Next.
6. Accept or change the domain information, and click Next.
7. Click Yes on the warning message.
NOTE: If you use a routable IP address for the local network adapter, the DHCP service
cannot be installed and configured on the server.
8. Make sure the IP address and subnet mask values are correct. Click Next to
continue.
9. Click Yes on the warning message.
10. On the Logon Information screen, select Log on automatically and enter the
password if you do not want to log on every time the server restarts. Otherwise,
select Log on manually. Click Next.
11. On the Windows Configuration screen, click Next to continue the setup. It may
take up to 30 minutes to complete this section.
HP ProLiant ML150 Server NOS Installation and Software Guide 3-9
HP CONFIDENTIAL
Writer: Pauline Tsai File Name: d-ch3 Installing Microsoft Windows Server 2003 and Small Business Server 2003.doc
Codename: Stone Soup Part Number: 343330-002 Last Saved On: 11/10/03 12:32 PM