ProLiant ML150 Server NOS Installation and Software Guide

Installing Microsoft Windows Server 2003 and Small Business Server 2003
3. Click OK to proceed when notified you have a new hard disk to configure.
4. Right-click to select available hard disk space and use the New Partition wizard
to create and format the additional partitions, if desired.
5. Exit the Computer Management tool.
Section 4. Configuring the Network
Phase 1 – Configuri ng Server IP Address
During the installation process, the system was configured to use DHCP (Dynamic
Host Configuration Protocol). If no DHCP server is found on the network, the system
will auto-configure a random IP address to start functioning. It is important that you
configure the proper IP address to be able to communicate with the clients:
1. Click Start > Control Panel > Network Connections > Local Area
Connection on the HP server.
NOTE: If the HP server hosts several network adapters, the window will show one Local Area
Connection icon for each network adapter present in the system. Identify the proper adapter by
browsing each one.
2. Click Internet Protocol (TCP/IP) > Properties > Use the following IP
address.
3. Enter an appropriate IP address and its subnet mask (if necessary).
4. Click OK then Close to exit the Local Area Connection Properties window.
Phase 2 – Attaching Clients to Network and Test Network Link
1. Create shares: create a folder on the HP server hard drive then share it (by right–
clicking the folder and selecting Sharing and Security).
2. Create users using the Windows 2003 Computer Management utility: Start > All
Programs > Administrative Tools > Computer Management > System Tools
> Local Users and Groups.
For Windows Server 2003: Action > New User.
3-6 HP ProLiant ML150 Server NOS Installation and Software Guide
HP CONFIDENTIAL
Writer: Pauline Tsai File Name: d-ch3 Installing Microsoft Windows Server 2003 and Small Business Server 2003.doc
Codename: Stone Soup Part Number: 343330-002 Last Saved On: 11/10/03 12:32 PM