ProLiant ML150 Server NOS Installation and Software Guide

Installing Microsoft Windows Server 2003 and Small Business Server 2003
Installing the LAN Driver
1. Insert the HP Startup CD-ROM in the CD-ROM drive of the server.
2. When the Startup menu appears, exit the menu.
3. Click Start > Control Panel > System > Hardware > Device Manager.
4. Click Network adapters.
5. Right-click Intel(R) PRO/1000 MT Server Adapter, and select Update Driver.
6. Select Install from a list or specific location, and click Next.
7. Browse for HP Startup CD-ROM\drivers\ws2003_LAN, and click Next to update
the LAN driver.
8. After the installation is finished, click Finish.
9. Exit all open windows and restart the server in order to initialize the server
properly.
Installing Windows 2003 Recovery Console
Refer to Tip#2 in the “Troubleshooting” section.
Section 3. Configuring the System
Phase 1 – Performi ng Hardware Status Check
In this section, you will run the Windows Device Manager tool to identify any issues
with the installed devices or resource conflicts.
1. Open Start > Control Panel > System > Hardware > Device Manager. Verify
that no devices have either a yellow band (!) or question mark (?) symbol next to
it.
— Yellow (!) means that there is a resource issue with the device.
— Question (?) means that the device is unknown.
3-4 HP ProLiant ML150 Server NOS Installation and Software Guide
HP CONFIDENTIAL
Writer: Pauline Tsai File Name: d-ch3 Installing Microsoft Windows Server 2003 and Small Business Server 2003.doc
Codename: Stone Soup Part Number: 343330-002 Last Saved On: 11/10/03 12:32 PM