ProLiant ML150 Server NOS Installation and Software Guide

Installing Microsoft Windows 2000 Server and Small Business Server 2000
Installing the Client Utility on a Client Workstation
1. Insert diskette 1 in the target client and run
A:\setup.exe
2. Click Continue on the setup screen.
3. Complete the Name and Organization Information form. You will be prompted
for this information only the first time the diskettes are used. Click OK to
validate and then OK again to confirm.
4. Click I Agree to accept the license agreement.
5. Click the Large Icon to start installation.
6. Select the installation mode you feel appropriate: all users (Yes) or current user
only (No).
7. Insert following diskette(s) when prompted and follow the on-screen instructions.
8. Click OK when the installation is completed then shutdown and restart
workstation.
Section 5. Configuring the Network
Phase 1 – Configuri ng Server IP Address
During the installation process the system was configured to use DHCP (Dynamic
Host Configuration Protocol). If no DHCP server is found on the network, the system
will auto-configure a random IP address to start functioning. It is important that you
configure the proper IP address to be able to communicate with the clients:
1. Right click My Network Places > Properties > Local Area Connection on the
HP server.
NOTE: If the HP server hosts several network adapters, the window will show one Local Area
Connection icon for each Network adapter present in the system. Identify the proper adapter
by browsing each one.
2. Click Internet Protocol (TCP/IP) > Properties > Use the following IP
address.
HP ProLiant ML150 Server NOS Installation and Software Guide 2-9
HP CONFIDENTIAL
Writer: Pauline Tsai File Name: c-ch2 Installing Microsoft Windows 2000 Server and Small Business Server 2000.doc
Codename: Stone Soup Part Number: 343330-002 Last Saved On: 11/10/03 12:31 PM