ProLiant ML150 Server NOS - (English) Installation and Software Guide

Installing SCO OpenServer 5.0.7
Installing the Operating System
1. Insert the (ad320) package BTLD diskette (HP ProLiant ML150 SCO
OpenServer 5.0.7 SCSI drivers diskette), and press the Enter key.
2. When the RESTRICTED RIGHTS LEGEND message appears, press the Enter
key.
3. Select Accept upon the End User License Agreement (EULA), and press the
Enter key.
4. Select the installation media device. Press the direction keys to move between the
items, and the Space Bar to change the setting for each item.
Media device to be used: IDE CD ROM
IDE Controller: primary
Master or Slave: master
Then select Accept above choices, and press the Enter key.
5. Make sure that the Base Operating System installation CD-ROM is inserted.
Select OK and press the Enter key.
6. Select the keyboard type by pressing the Space Bar. Then select Accept above
choices, and press the Enter key.
7. Enter the license number and license code. Then select Accept above choices,
and press the Enter key.
8. Select Fresh and then press the Enter key.
9. Select OK, and press the Enter key to start the configuration.
10. Enter the information if the default settings do not match your requirements.
Then select Accept above choices, and press the Enter key.
11. Select the system profile. Then select Accept above choices, and press the Enter
key.
12. Select Hard disk setup and Optional software. Then select Accept above
choices, and press the Enter key.
HP ProLiant ML150 Server NOS Installation and Software Guide 12-3
HP CONFIDENTIAL
Writer: Pauline Tsai File Name: m-ch12 Installing SCO OpenServer 5.0.7.doc
Codename: Stone Soup Part Number: 343330-003 Last Saved On: 1/7/04 4:33 PM