ProLiant ML150 Server NOS - (English) Installation and Software Guide

Installing SCO OpenServer 5.0.7
Section 1. Creating the Driver Diskette
1. Insert one blank, formatted 3.5” diskette into the flexible diskette drive of a PC
running Microsoft Windows.
2. Insert the HP Startup CD-ROM into the CD-ROM drive of the above PC and
click HP ProLiant ML150 drivers on the Startup menu.
3. Select the proper driver to install.
4. Follow the on-screen instructions to create the (ad320) package BTLD diskette
(HP ProLiant ML150 SCO OpenServer 5.0.7 SCSI drivers diskette).
NOTE: If the PC does not auto-start the Startup menu, start it by opening startup.htm, found
at the root level of the Startup CD-ROM.
Section 2. Performing the SCO OpenServer 5.0.7
Installation
Booting
1. Turn on the server and insert the Base Operating System installation CD-ROM.
2. On boot prompt, type link after the prompt as shown below:
boot: defbootstr link=“ad320”
Press the Enter key.
3. When the “Please insert the fd(65)/ad320 volume and press <Return>, or ‘q’ to
quit:” message appears, insert the (ad320) package BTLD diskette you created
from the HP Startup CD-ROM, and press the Enter key.
4. After loading the SCSI driver, press the Enter key to start the installation.
12-2 HP ProLiant ML150 Server NOS Installation and Software Guide
HP CONFIDENTIAL
Writer: Pauline Tsai File Name: m-ch12 Installing SCO OpenServer 5.0.7.doc
Codename: Stone Soup Part Number: 343330-003 Last Saved On: 1/7/04 4:33 PM