ProLiant ML150 Server NOS - (English) Installation and Software Guide

Installing SCO UnixWare 7
6. Run netcfg to add and configure the NICs.
a. On the pop-up window, click Hardware > Add new LAN adapter.
b. Select Ethernet-Intel(R) PRO/1000MT Network Connection (DDI
8)(7.2.10)-PCI Slot 0 Bus 4 Device 1 Function 0, and click Continue.
c. On the Network Driver Configuration window, click OK.
d. On the Add protocol window, select TCP/IP and click Add.
e. On the Internet Protocol Configuration window, click Yes (or No to
configure the settings) for the DHCP client, and then click OK.
f. On the Configure networking product window, click OK.
g. Click Hardware > Exit to exit netcfg.
7. Type
shutdown –y now, and press the Enter key to reboot the system.
Section 3. Enabling the Second Processor
If a second processor is installed in your server, then you must install an additional
OS Multiprocessor Support (OSMP) package to enable this second processor in SCO
UnixWare 7.
1. Turn on the server and log in the system as “root.”
2. Insert the UnixWare 7.1.3 Base Operating System Disk 1 of 4.
3. Run the terminal program. When the window displays, mount the CD-ROM.
# mount /dev/cdrom/cdrom1 /mnt
4. Install the OSMP package to the SCO UnixWare 7 system.
# pkgadd –d /mnt osmp
5. When the Choose Platform Support Module window appears, press the Enter
key.
11-6 HP ProLiant ML150 Server NOS Installation and Software Guide
HP CONFIDENTIAL
Writer: Pauline Tsai File Name: l-ch11 Installing SCO UnixWare 7.doc
Codename: Stone Soup Part Number: 343330-003 Last Saved On: 1/7/04 4:13 PM