ProLiant ML150 Server NOS - (English) Installation and Software Guide

Installing SCO UnixWare 7
14. Enter the system owner’s information:
a. Type the owner’s name, and press the Enter key.
b. Type the owner’s login ID, and press the Enter key.
c. Type the owner’s user ID (UID) number, and press the Enter key. Default is
101.
d. Type the owner’s password, and press the Enter key.
e. Type the password again, and press the F10 key.
15. Enter the root password, press the Enter key to re-enter it, and then press the F10
key.
16. Select Accept, and press the F10 key to accept the license agreement.
17. Press the F10 key to install the operating system.
18. After the installation is finished, make sure that the CD-ROM and flexible
diskette drives are empty. Then press the Enter key, and the system will shut
down and restart.
19. After rebooting, select the type of mouse, and then press the F10 key.
If your selection is not the No Mouse option, then you need to enter the number
of buttons (not when you use a USB mouse) and click any of the mouse buttons
to test if the mouse is working properly.
20. Insert the UnixWare 7.1.3 Base Operating System Disk 2 of 4, and press the F10
key.
21. Select Linux Kernel Personality for UnixWare 7 and press the F10 key to
install.
22. After installing the selected product(s), press the F10 key.
23. Insert the UnixWare 7.1.3 Base Operating System Disk 3 of 4, and press the F10
key.
24. Select one of the products that you want to install, and press the F10 key. Or,
press the F8 key to defer the products installation.
11-4 HP ProLiant ML150 Server NOS Installation and Software Guide
HP CONFIDENTIAL
Writer: Pauline Tsai File Name: l-ch11 Installing SCO UnixWare 7.doc
Codename: Stone Soup Part Number: 343330-003 Last Saved On: 1/7/04 4:13 PM