ProLiant ML150 Server NOS - (English) Installation and Software Guide

Installing SCO UnixWare 7
Section 1. Creating the Driver Diskette
1. Insert one blank, formatted 3.5” diskette into the flexible diskette drive of a PC
running Microsoft Windows.
2. Insert the HP Startup CD-ROM into the CD-ROM drive of the above PC and
click HP ProLiant ML150 drivers on the Startup menu.
3. Select the proper driver to install.
4. Follow the on-screen instructions to create the SCO UnixWare 7 AIC-7902W
SCSI driver diskette (HP ProLiant ML150 SCO Unixware 7.1.3 SCSI drivers
diskette).
NOTE: If the PC does not auto-start the Startup menu, start it by opening startup.htm, found
at the root level of the Startup CD-ROM.
Section 2. Performing the SCO UnixWare 7 Installation
Booting
1. Turn on the server and insert the UnixWare 7.1.3 Base Operating System Disk 1
of 4.
2. The system will display a graphic menu. Default is Proceed with installation in
English. Press the Enter key.
3. Press the F10 key on the welcome screen to continue.
Basic Configuration
1. Select Americas (Latin-1) for your zone, and press the F10 key.
2. Select C (English) for your locale, and press the F10 key.
3. Select United States for your keyboard, and press the F10 key.
4. Enter the license information from your registration card (or request it through an
online form), and then press the F10 key.
11-2 HP ProLiant ML150 Server NOS Installation and Software Guide
HP CONFIDENTIAL
Writer: Pauline Tsai File Name: l-ch11 Installing SCO UnixWare 7.doc
Codename: Stone Soup Part Number: 343330-003 Last Saved On: 1/7/04 4:13 PM