ProLiant ML150 Server NOS - (English) Installation and Software Guide

Installing SCO Open UNIX 8
Installing the Network Driver
1. Insert the Startup CD-ROM and mount the CD-ROM.
# mount /dev/cdrom/cdrom1 /mnt
2. Copy the e1008g.pkg file to any directory, like /tmp.
# cp /mnt/drivers/ou8uw7xl/e1008g.pkg /tmp
3. Make sure that no other users log on the system, and all user applications are
closed.
4. If there is an older version of the e1008g driver on the system (to find out the
driver version, type
pkginfo -l e1008g):
a. Run
netcfg and remove any configured NICs.
b. Exit
netcfg.
c. Remove the old driver by typing
pkgrm e1008g.
5. Install the new driver using
pkgadd.
# pkgadd -d /tmp/e1008g.pkg
Press the Enter key, and then press the Y key then the Enter key to confirm the
installation.
6. Run
netcfg to add and configure the NICs.
a. On the pop-up window, click Hardware > Add new LAN adapter.
b. Select Ethernet-Intel(R) PRO/1000 MT Network Connection (DDI
8)(7.2.10)-PCI Slot 0 Bus 4 Device 1 Function 0.
c. Click Continue > OK
d. On the Add protocol window, click Add.
e. Enter your network settings and click OK.
f. On the Configure networking product window, click OK.
g. Click Hardware > Exit to exit netcfg.
7. Type
shutdown –y now and press the Enter key to reboot the system.
10-6 HP ProLiant ML150 Server NOS Installation and Software Guide
HP CONFIDENTIAL
Writer: Pauline Tsai File Name: k-ch10 Installing SCO Open UNIX 8.doc
Codename: Stone Soup Part Number: 343330-003 Last Saved On: 1/7/04 4:13 PM