ProLiant ML150 Server NOS - (English) Installation and Software Guide

Installing SCO Open UNIX 8
5. Press the F10 key.
6. Select Use Default filesystem sizes and types, and press the F10 key.
7. Select Use default disk options, and press the F10 key.
8. Select License-Based Defaults, and press the F10 key.
9. Select Defer network configuration, and press the F10 key.
10. Enter the date and time values. Or, if date and time settings are correct, press the
F10 key.
11. Select a desired security level, and press the F10 key.
12. Enter the system owner’s information:
a. Type the owner’s name, and press the Enter key.
b. Type the owner’s login ID, and press the Enter key.
c. Type the owner’s user ID (UID) number, and press the Enter key. Default is
101.
d. Type the owner’s password, and press the Enter key.
e. Type the password again, and press the F10 key.
13. Enter the root password, press the Enter key to re-enter it, and then press the F10
key.
14. Select Accept, and press the F10 key to accept the license agreement.
15. Press the F10 key to install the operating system.
16. Re-insert the SCO Open UNIX 8 AIC-7902W SCSI driver (HP ProLiant ML150
SCO Open UNIX 8 SCSI drivers) diskette you created from the HP Startup CD-
ROM to install the SCSI driver, and press the Enter key.
17. After the installation is finished, make sure that the CD-ROM and flexible
diskette drives are empty. Then press the Enter key, and the system will shut
down and restart.
10-4 HP ProLiant ML150 Server NOS Installation and Software Guide
HP CONFIDENTIAL
Writer: Pauline Tsai File Name: k-ch10 Installing SCO Open UNIX 8.doc
Codename: Stone Soup Part Number: 343330-003 Last Saved On: 1/7/04 4:13 PM