ProLiant ML150 Server NOS - (English) Installation and Software Guide

Installing Red Flag Linux 4.0 Advanced Server
c. Select 空闲 (Free Space) again, and then select 新建 (New) to create a root
partition.
Set the parameters as follows:
挂载点 (Mount Point): /
文件系统类型 (file system): ext3
大小 (Size) (MB): check the 使用全部可用空间 (Fill to maximum
allowable size) item.
Then click 确定 (OK) to continue.
5. Click 下一步 (Next).
6. Accept the default setting for 引导记录安装位置 (Install Boot Loader record
on). Click 下一步 (Next) to continue.
7. The installation program will summarize the HDD partitioning information, boot
manager installation location as well as the size of software that will be installed.
Review, and if this is acceptable, click 下一步 (Next) to proceed.
8. Enter a password for “root” access, and re-enter it to confirm. Because the root
user has extensive permissions, the password for “root” should be chosen
carefully. Click 下一步 (Next) to continue.
9. Click 下一步 (Next) to start the installation. After the installation, the system
will reboot.
10. After rebooting, the installation logs will be saved in the directory of
/root/install.log, and the installation configurations will be saved in the directory
of /root/anaconda-ks.cfg.
11. If you want to create a boot diskette, uncheck the 跳过创建引导盘 (Skip Boot
Diskette Creation) item, insert one blank, formatted 3.5” diskette, and click 下
一步 (Next).
Otherwise, check the 跳过创建引导盘 (Skip Boot Diskette Creation) item, and
click 下一步 (Next).
HP ProLiant ML150 Server NOS Installation and Software Guide 9-3
HP CONFIDENTIAL
Writer: Pauline Tsai File Name: j-ch9 Installing Red Flag Linux 4.0 Advanced Server.doc
Codename: Stone Soup Part Number: 343330-003 Last Saved On: 1/7/04 4:10 PM