ProLiant ML150 Server NOS - (English) Installation and Software Guide

Installing Turbolinux 8 Server
8-4 HP ProLiant ML150 Server NOS Installation and Software Guide
HP CONFIDENTIAL
Writer: Pauline Tsai File Name: i-ch8 Installing Turbolinux 8 Server.doc
Codename: Stone Soup Part Number: 343330-003 Last Saved On: 1/7/04 3:56 PM
•
•
13. The system will display the configuration information. Click Next.
14. Click OK on the warning message to start the installation.
15. After the installation, you can install additional packages from the CD-ROM. If
you do not want to install additional packages, check the Skip additional
package installation item and click Next.
16. Select a desired security level, and click Next.
17. If the Create boot disk item is checked in step 1, insert one blank, formatted
3.5” diskette. Or, check the Skip creating boot disk item, and click Next.
18. The installation of Turbolinux 8 Server is complete. Click Finish.
19. Make sure that the CD-ROM and flexible diskette drives are empty. Press the
Enter key to reboot the server.
20. Your system is now set up and ready to use. It will enter the login prompt. Enter
“root” for the user name, and the root password to log in the system. Then type
startx to use X.
Section 2. MSHD Installation
Please refer to “Installing MSHD” in Chapter 13 for the detailed instructions on
installing MSHD from the Startup CD-ROM.
Section 3. On-Line Information and Software Sources
HP World Wide Web access: http://www.hp.com/
Turbolinux World Wide Web access: http://www.turbolinux.co.jp