ProLiant ML150 Server NOS - (English) Installation and Software Guide

8
Installing Turbolinux 8 Server
Preparing the Installation
Please refer to “Preparing the Server for NOS Installation” in Chapter 1 for
recommendations on server preparation. Then gather the following material:
The HP Startup CD-ROM for the HP ProLiant ML150 server
One blank, formatted 3.5-inch diskette (Optional)
Turbolinux 8 Server CD-ROM
Two or more clients for testing purposes (Optional)
NOTE: If an optional ZCR card is installed in the server, the operating system will detect the
card and install the driver automatically. The ZCR driver installation procedure is embedded in
the standard procedure.
High Level Process Flow
1. Performing the Turbolinux 8 Server installation
2. MSHD installation
3. On-line information and software sources
HP ProLiant ML150 Server NOS Installation and Software Guide 8-1
HP CONFIDENTIAL
Writer: Pauline Tsai File Name: i-ch8 Installing Turbolinux 8 Server.doc
Codename: Stone Soup Part Number: 343330-003 Last Saved On: 1/7/04 3:56 PM