ProLiant ML150 Server NOS - (English) Installation and Software Guide

Installing United Linux 1.0 (turbolinux enterprise server 8)
7. Click Next to finish the partitioning schemes.
8. Click Accept to proceed.
9. Click Yes, install on the warning message to proceed with the installation.
Performing the Installation
1. Insert the turbolinux enterprise server 8 Disk 1 Install CD when prompted, and
click OK.
2. Insert the turbolinux enterprise server 8 Disk 2 UnitedLinux v1.0 Binary CD1
when prompted, and click OK.
3. Insert the Turbolinux enterprise server 8 Disk 1 Install CD again when prompted,
and click OK.
4. The installation of the operating system is complete. The system must reboot. Be
sure that the CD-ROM and flexible diskette drives are empty. Press the Enter
key to reboot.
5. Enter a password (at least 5 characters) for the “root” access, and enter it again.
Because the root user has extensive permissions, the password for “root” should
be chosen carefully. Click Next to continue.
6. Enter the personal information as necessary. Click Next to continue.
7. Select the current desktop settings for the X Window System (the default setting
is Graphical desktop environment). Click Accept to continue.
NOTE: The system will detect your printer. If your do not want to detect the printer, click Skip
detection to continue.
8. The screen will display the configuration information. If you want to change the
default settings, click an item, or click Change on the bottom and select an item.
Then click Next.
9. Your system is now set up and ready to use. The system must reboot. Click OK
to continue, and then the system will enter the login prompt.
7-4 HP ProLiant ML150 Server NOS Installation and Software Guide
HP CONFIDENTIAL
Writer: Pauline Tsai File Name: h-ch7 Installing United Linux 1.0 (turbolinux enterprise server 8).doc
Codename: Stone Soup Part Number: 343330-003 Last Saved On: 1/7/04 3:55 PM