ProLiant ML150 Server NOS - (English) Installation and Software Guide

Installing United Linux 1.0 (turbolinux enterprise server 8)
c. Set the parameters as follows:
Format (file system): Ext3
Size: Start cylinder: 0
Size: End: +20M
Mount point: /boot
d. Click OK.
5. Create a swap partition.
a. Select Create.
b. Select Primary partition, and click OK.
c. Set the parameters as follows:
Format (file system): Swap
Size: Start cylinder: (by default value)
Size: End: (2 x server memory size)
Mount point: Swap
d. Click OK.
6. Create a root partition.
a. Select Create.
b. Select Primary partition, and click OK.
c. Set the parameters as follows:
Format (file system): Ext3
Size: Start cylinder: (by default value)
Size: End: (by default value)
Mount point: /
d. Click OK.
HP ProLiant ML150 Server NOS Installation and Software Guide 7-3
HP CONFIDENTIAL
Writer: Pauline Tsai File Name: h-ch7 Installing United Linux 1.0 (turbolinux enterprise server 8).doc
Codename: Stone Soup Part Number: 343330-003 Last Saved On: 1/7/04 3:55 PM