ProLiant ML150 Server NOS - (English) Installation and Software Guide

Installing United Linux 1.0 (SCO Linux 4)
1. Select Change > Partition.
2. Choose create custom partition setup.
3. Select Custom partitioning – for expe rts.
4. Choose Custom partition.
a. Select Create.
b. Select Primary partition.
c. Set the parameters for the boot partition as follows:
Format (file system):
ext2
Size: Start: 0
End: +20M
Mount point: /boot
5. Create a swap partition.
a. Select Create.
b. Select Primary partition.
c. Set the parameters for the swap partition as follows:
Format (file system):
swap
Size: Start: default
End: 2 x amount of memory in server
Mount point: swap
6. Create a root partition.
a. Select Create.
b. Select Primary partition.
HP ProLiant ML150 Server NOS Installation and Software Guide 5-3
HP CONFIDENTIAL
Writer: Pauline Tsai File Name: f-ch5 Installing United Linux 1.0 (SCO Linux 4).doc
Codename: Stone Soup Part Number: 343330-003 Last Saved On: 1/7/04 3:52 PM